Polypro 7 Mil Self Adhesive, Water Resistant Film

Polypro 7 Mil Self Adhesive, Water Resistant Film

PRINTER COMPATIBILITY
dye-ink.jpgpigment-ink.jpgpagewide.jpglatex.jpguv-curable.jpg

903
is a 7 mil, tear resistant, smooth, polypropylene banner with a low glare, satin finish, a water resistant, scratch
resistant coating and a permanent pressure sensitive adhesive with removable liner. 903 provides excellent ink adhesion,
print quality, black density, color pop and image clarity as well as exceptional strength and durability for repeated
handling products lay extremely flat, both on the printer and in final application. Short term outdoor.
PHYSICAL CHARACTERISTICS
Core Size 3.0" w/Universal Core adapter for 2" - Outside Diameter of Roll 4.9" - Caliper - Film 7 mil nominal (without liner)
Adhesive 1 mil - Release liner 8.5 mil - Opacity >90% - Whiteness >120 (CIE) - Base material Polypropylene
Film (PP) Adhesive Permanent Solvent Acrylic Liner Polyester - Structure Coated -
Peel Strength 1200 g/in. to stainless steel
*All values are for reference only
FEATURES AND BENEFITS
Tear Resistant Polypropylene - Base Lay Flat - Water Resistant - Scratch Resistant - Fast Dry time - Excellent Print
Performance - Excellent Ink adhesion - Excellent Line Acuity - Excellent Image Sharpness - Excellent Black Density
Smooth Matte Finish
PROCESSING TIPS
Preferred side out
FINISHING & PRINTING
Compatible with pressure sensitive, heat assist and thermal over laminates. - Allow sufficient time for inkjet prints
to completely dry before rolling, laminating or cutting. - Use a sharp blade to prevent ink and toner flaking on the edges
Over lamination is not required. However, it can provide additional surface protection from dirt, abrasion and moisture.
Shelf Life
2 years from ship date
STORAGE CONDITIONS
Temperature 50-85° F (10-30° C) - Relative Humidity 30-65%
OPTIMAL SERVICE ENVIRONMENT
Temperature 50-85° F (10-30° C) - Relative Humidity 30-65%